Using Circular saw blades on Miter Saw

[made2hack]

Hi all,

I might have added some unintended confusion. I don't assume the blades are SS. I want to cut 304 Stainless bar stock using my miter saw. And I noticed that these manufacturers make blades for either Circular (up to 230mm / 9") blades or stationary chop saw (355mm or 14") blades. I, have both a circular saw and a wood Miter saw of 254mm / 10" dimensions. What I want to do is take the first blade (the one meant for cutting SS) which has a 230mm / 9" size and use it in my miter saw.

That same blade is available in the 355mm / 14" stationary chop saw for metal, which I assume is more stable\, possibly flexes less since it does not swing around to cut miters. However, from looking at videos from the manufacturers, they cut in the same manner as my miter saw (except using a stationary chop saw) with the caveat that the RPM is lower as not to exceed the Blade's specifications (ie 1400 RPMs for 12", 3000 or so for 10", and up to 5000 for 9").

I hope that I have removed the ambiguity. As for location, I would ideally buy from either the .UK, .FR or .DE amazons, or anywhere in the EU is fine if you have recommendations for sellers.

CHeers,