Free 186 More Best Homemade Tools eBook:  
New: 300+ fresh build posts/day from 275 forums → BuildThreads.com

User Tag List

Results 1 to 10 of 10

Thread: Vacuum truck implosion - GIF

  1. #1
    Supporting Member
    Join Date
    May 2024
    Posts
    6,082
    Thanks
    0
    Thanked 11,093 Times in 4,736 Posts

    Vacuum truck implosion - GIF

    Vacuum truck implosion.




    Previously:

    Controlled vacuum collapse of rail car - GIF
    Building implosion failure - video
    New: BuildThreads.com - 300+ build posts/day (with photos)

  2. The Following 4 Users Say Thank You to ToolTalkBot For This Useful Post:

    mr mikey (Jul 3, 2024), nova_robotics (Jul 7, 2024), Ralphxyz (Jul 6, 2024), tuchie (Jul 7, 2024)

  3. #2
    Supporting Member IntheGroove's Avatar
    Join Date
    May 2019
    Location
    Lake Tahoe
    Posts
    2,493
    Thanks
    274
    Thanked 1,378 Times in 828 Posts

    IntheGroove's Tools
    Sur could have used a vacuum breaker valve...

  4. #3
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    12,611
    Thanks
    2,677
    Thanked 11,100 Times in 5,384 Posts

    Frank S's Tools
    Quote Originally Posted by IntheGroove View Post
    Sur could have used a vacuum breaker valve...
    Better yet a vacuum tank instead of a pressure tank.
    Vacuum truck implosion - GIF-imperial_industries_vac3000_180208_160651.jpg
    Never try to tell me it can't be done
    When I have to paint I use KBS products

  5. The Following User Says Thank You to Frank S For This Useful Post:

    clydeman (Jul 2, 2024)

  6. #4
    Supporting Member IntheGroove's Avatar
    Join Date
    May 2019
    Location
    Lake Tahoe
    Posts
    2,493
    Thanks
    274
    Thanked 1,378 Times in 828 Posts

    IntheGroove's Tools
    What? and use the right tool for the job. But that would cost more money...

  7. The Following User Says Thank You to IntheGroove For This Useful Post:

    BuffaloJohn (Jul 2, 2024)

  8. #5
    Supporting Member Floradawg's Avatar
    Join Date
    Jul 2018
    Location
    Flora, MS
    Posts
    1,474
    Thanks
    2,061
    Thanked 446 Times in 341 Posts

    Floradawg's Tools
    Quote Originally Posted by IntheGroove View Post
    What? and use the right tool for the job. But that would cost more money...
    Cheaper in the long run.
    Stupid is forever, ignorance can be fixed.

  9. The Following User Says Thank You to Floradawg For This Useful Post:

    Frank S (Jul 2, 2024)

  10. #6
    Supporting Member IntheGroove's Avatar
    Join Date
    May 2019
    Location
    Lake Tahoe
    Posts
    2,493
    Thanks
    274
    Thanked 1,378 Times in 828 Posts

    IntheGroove's Tools
    Until your unit collapses and there's a bunch of overflowing septic tanks in need...

  11. #7
    Supporting Member mr mikey's Avatar
    Join Date
    May 2022
    Location
    Michigan
    Posts
    324
    Thanks
    1,221
    Thanked 93 Times in 74 Posts

    mr mikey's Tools
    Back in the early nineties at a Ford Truck dealer I worked at I was given a job to repair the fuel tanks. It was a F800 with a 429 gas engine. Both tanks imploded. There was a failure with the evap system. After I replaced a defective vacuum controlled valve instead of replacing the tanks the boss said just pressurize them with air. I'm not doing. The customer drove away with damaged tanks that probably held 10 less gallons between the two.

  12. #8
    Supporting Member Hoosiersmoker's Avatar
    Join Date
    Mar 2018
    Posts
    2,311
    Thanks
    493
    Thanked 593 Times in 462 Posts

    Hoosiersmoker's Tools
    Wow! That really sucks...
    I know someone was thinking it!
    "The man who views the world at 50 the same as he did at 20 has wasted 30 years of his life."
    - Muhammad Ali

  13. #9
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    12,611
    Thanks
    2,677
    Thanked 11,100 Times in 5,384 Posts

    Frank S's Tools
    Quote Originally Posted by mr mikey View Post
    Back in the early nineties at a Ford Truck dealer I worked at I was given a job to repair the fuel tanks. It was a F800 with a 429 gas engine. Both tanks imploded. There was a failure with the evap system. After I replaced a defective vacuum controlled valve instead of replacing the tanks the boss said just pressurize them with air. I'm not doing. The customer drove away with damaged tanks that probably held 10 less gallons between the two.
    Fill the tank completely full of liquid then apply 3 to 4 PSI positive pressure and lightly tapping all around the edges of where the tank is collapsed For the Rectangular diesel fuel tanks which were also a step to get in the cab of the truck 5 to 7 PSI is sometimes required
    7PSI is enough to ruin a motorcycle tank don't ask me how I know
    Never try to tell me it can't be done
    When I have to paint I use KBS products

  14. The Following User Says Thank You to Frank S For This Useful Post:

    Ralphxyz (Jul 6, 2024)

  15. #10
    Supporting Member
    Join Date
    Sep 2018
    Posts
    2,920
    Thanks
    13,819
    Thanked 1,776 Times in 999 Posts

    nova_robotics's Tools
    I wonder if you can fix this with a stick of dynamite like those explosive forming videos.



    2,500+ Tool Plans

  16. The Following User Says Thank You to nova_robotics For This Useful Post:

    Frank S (Jul 7, 2024)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •