Free 186 More Best Homemade Tools eBook:  
New: 300+ fresh build posts/day from 275 forums → BuildThreads.com

User Tag List

Results 1 to 3 of 3

Thread: Whatever Works assortment

Threaded View

  1. #1
    Supporting Member
    Join Date
    Mar 2012
    Location
    Halifax Nova Scotia
    Posts
    18
    Thanks
    0
    Thanked 32 Times in 14 Posts

    nortin's Tools

    Whatever Works assortment

    Click image for larger version. 

Name:	100_3142.jpg 
Views:	736 
Size:	99.0 KB 
ID:	645Click image for larger version. 

Name:	100_3143.jpg 
Views:	677 
Size:	98.2 KB 
ID:	646Click image for larger version. 

Name:	100_3145.jpg 
Views:	690 
Size:	99.2 KB 
ID:	640
    Puller for harmonic balancer from scrap pile and bolt and a seal and bearing race driver also from the scrap pile.A piece of half inch round rod heated,flattened and bent used for a body pick for working out autobody dents in hard to get at spots.the stripped down distributor can rotate the engines oil pump(slot)to aid in placing the distributor.A slot cut in the top of the shaft indicates exactly how the slot in the pump is sitting.Also can be spun with a drill to prime engine with oil prior to startup. The drilled distributor cap is a visual aid for checking location of the rotor when engine is on its timing mark,helpful to verify if its on the compression stroke.Sanding block is 3 pieces off of a snap together rubber floor tile glued together ,just gorilla tape sandpaper on and sand away,Make a long one for flat surfaces.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	100_3146.jpg 
Views:	631 
Size:	100.3 KB 
ID:	641   Click image for larger version. 

Name:	100_3141.jpg 
Views:	634 
Size:	100.9 KB 
ID:	642   Click image for larger version. 

Name:	100_3140.jpg 
Views:	640 
Size:	98.3 KB 
ID:	643   Click image for larger version. 

Name:	100_3148.jpg 
Views:	603 
Size:	96.4 KB 
ID:	644  
    Last edited by nortin; May 18, 2013 at 09:31 AM.

  2. The Following User Says Thank You to nortin For This Useful Post:

    kbalch (May 21, 2013)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •