Printable View
Wood surfacing machine.
<video controls autoplay loop> <source src="https://diqn32j8nouaz.cloudfront.net/timber_planer_green.mp4" type="video/mp4"> Your browser does not support the video tag. </video>
Previously:
https://www.homemadetools.net/forum/...143#post199468
https://www.homemadetools.net/forum/...0927#post73406
https://www.homemadetools.net/forum/...015#post145045
https://www.homemadetools.net/forum/...895#post183618
https://www.homemadetools.net/forum/...447#post166282
What, no chips. Does the machine slice off a thin veneer?
I want to see an oak or beech timber run through that.
I can see some fun uses for that thin sheet it cuts off!!!
Yep break it up and sell it as termite feed ha,ha just kidding it could be cut up and used as a very thin inlay though or maybe used to make modelers plywood. 4 to 8 or even 12 layers laminated and pressed into plywood would make great scaled thickness ply wood for model aircraftQuote:
Originally Posted by hemmjo
No chips! Time was, using hand plane, proper evidence of a sharp iron was that shaving action; so sheer you could read text through it.
That is a chip, just a long thin unbroken one!!!