Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Page 1 of 4 1 2 3 4 LastLast
Results 1 to 10 of 40

Thread: Modifications and Improvements to a Unimat SL 1000 Lathe

  1. #1
    Supporting Member Paul Jones's Avatar
    Join Date
    May 2014
    Location
    Del Mar, California
    Posts
    1,231
    Thanks
    5,810
    Thanked 1,440 Times in 655 Posts

    Paul Jones's Tools

    Modifications and Improvements to a Unimat SL 1000 Lathe

    I want to share some photos of the recent improvements I made to my Unimat SL 1000 lathe which has a 3" swing. I bought this lathe new in 1970, used for a few years and then put into storage. I recently started to use the lathe again and decided it needed a make-over after being inspired by the book series "The Shop Wisdom" by Rudy Kouhoupt.

    I decided to build a storage platform with a drawer ( see Homemade Lathe Cabinet ), add a permanently installed milling/drilling head and more intermediate pulleys for slower spindle RPM, raise the whole lathe up on 1" tall riser blocks and added spare threaded holes in the riser blocks for future attachments (e.g., the indexing pin arm (http://www.homemadetools.net/homemad...nimat-sl-lathe) and yet to be designed attachments), add dial indicators for the x, y and z directions (I usually work in inches, see Homemade Cross Slide Dial Indicator ), and add adjustable carriage stops to the x-direction ( see Homemade Lathe Carriage and Milling Stops ).

    It took many iterations to align the x, y, and z axes to each other but everything seems to remain in alignment with each axis. Along the way I replaced the motors with continuous duty U-100 motors. There are many more future features I want to add such a longitudinal power feed for the x-axis and a dividing plate for the spindles ( Homemade Indexing Plate for Unimat SL Lathe ). Some of the most fun I have is designing the parts before anything is machined and then making a hard copy for recording my changes as the parts are built (and then adding these changes back on the original drawings).

    Eventually I want to start building stationary steam engines but I am having too much fun with the Unimat.

    I plan to post more of my photos as the Unimat improvements progress.

    Paul Jones
    Attached Thumbnails Attached Thumbnails Modifications and Improvements to a Unimat SL 1000 Lathe-unimat-cabinet-drawer-details.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-unimat-drawer-insert-details.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-unimat-drawer-dividers-two-level-compartment.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-unimat-dial-indicators-carriage-stops-details.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-making-chips-machining-z-axis-dial-indicator-holder.jpg  

    Modifications and Improvements to a Unimat SL 1000 Lathe-indexing-drilling-index-plate-adapter-ring.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-unimat-set-up-slotting-saw-using-homemade-arbor.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-fly-cutting-ends-copper-vise-jaws.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-adjustable-detent-unimat-iindexing-plate.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-cutting-clamping-slot-qctp-boring-bar-holder.jpg  

    Modifications and Improvements to a Unimat SL 1000 Lathe-drilling-miniature-bolt-pattern-compound-steam-engine-entablature-.jpg  

    186 More Best Homemade Tools eBook
    Last edited by Paul Jones; Oct 9, 2017 at 08:44 AM. Reason: More information about the detent to indexing plate

  2. The Following 24 Users Say Thank You to Paul Jones For This Useful Post:

    AmateurMachinist (Mar 24, 2019), asterix (Feb 9, 2022), big o (Nov 12, 2016), C-Bag (Sep 4, 2015), Captainleeward (Nov 11, 2015), DIYSwede (May 30, 2019), Hemi (Jun 21, 2018), Home-PC (Mar 19, 2021), jjr2001 (Feb 15, 2018), Jon (Jul 31, 2020), kbalch (Jul 7, 2014), mklotz (Oct 17, 2016), morsa (Oct 13, 2016), nevadablue (Aug 16, 2015), NortonDommi (Jun 21, 2018), old_toolmaker (Mar 3, 2018), PJs (Sep 29, 2015), rendoman (Jul 4, 2016), sparky42 (Feb 9, 2022), Tonyg (Aug 1, 2020), Toolmaker51 (Jun 28, 2017), vafthrudnir (Feb 25, 2018), Workshopshed (Jul 7, 2014), zhekov1234 (Feb 5, 2017)

  3. #2
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,057
    Thanks
    771
    Thanked 1,850 Times in 1,652 Posts
    Cool mods! I look forward to your tool contributions here.

    2000 Tool Plans

  4. The Following User Says Thank You to DIYer For This Useful Post:

    Paul Jones (Aug 13, 2014)

  5. #3
    Supporting Member Paul Jones's Avatar
    Join Date
    May 2014
    Location
    Del Mar, California
    Posts
    1,231
    Thanks
    5,810
    Thanked 1,440 Times in 655 Posts

    Paul Jones's Tools
    DIYer -- Thank you for the feedback. There is so much to see and learn from the HMT website -- Paul

  6. #4
    kbalch's Avatar
    Join Date
    Jun 2012
    Location
    Clermont, FL
    Posts
    5,034
    Thanks
    2,275
    Thanked 531 Times in 383 Posts
    Thanks Paul! I've added your Lathe Modifications to our Lathes category, as well as to your builder page: Paul Jones' Homemade Tools. Your receipt:


  7. The Following 2 Users Say Thank You to kbalch For This Useful Post:

    Paul Jones (Aug 13, 2014), zhekov1234 (Feb 5, 2017)

  8. #5
    Supporting Member Paul Jones's Avatar
    Join Date
    May 2014
    Location
    Del Mar, California
    Posts
    1,231
    Thanks
    5,810
    Thanked 1,440 Times in 655 Posts

    Paul Jones's Tools
    Since first publishing the Unimat modifications, I have added a few more features to the 3" swing lathe including indexing plates for both the headstock and milling head, plus some specialized tooling e.g., http://www.homemadetools.net/qctp-holders and http://www.homemadetools.net/slotting-saw-arbor ). The additional improvements have been posted at Homemade Tools as separate articles with descriptions and pictures.
    Attached Thumbnails Attached Thumbnails Modifications and Improvements to a Unimat SL 1000 Lathe-unimat-boring-bar-holder.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-carriage-stop-dial-indicator-details.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-improved-rotating-unimat-handles.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-gage-blocks-provide-reference-height-above-milling-table.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-unimat-index-plate-headstock.jpg  

    Modifications and Improvements to a Unimat SL 1000 Lathe-indexing-plate-unimate-milling-head.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-details-unimat-indexing-plate.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-custom-unimate-faceplate-10-32-taped-holes.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-fly-cutter-attached-small-faceplate.jpg   Modifications and Improvements to a Unimat SL 1000 Lathe-detent-marking-tool-indexing.jpg  

    Last edited by Paul Jones; Dec 23, 2015 at 08:42 PM.

  9. The Following 6 Users Say Thank You to Paul Jones For This Useful Post:

    kbalch (Apr 3, 2015), nevadablue (Jul 17, 2015), pennswoodsed (Sep 7, 2015), PJs (Sep 29, 2015), Tonyg (Aug 1, 2020), zhekov1234 (Feb 5, 2017)

  10. #6
    Supporting Member mklotz's Avatar
    Join Date
    Aug 2015
    Location
    LA, CA, USA
    Posts
    3,433
    Thanks
    357
    Thanked 6,370 Times in 2,116 Posts

    mklotz's Tools
    Great stuff, Paul. Like you, I added DIs to all three axes of my Unimat. I would rather have forced the USA to go metric but adding the DIs seemed a bit easier.
    ---
    Regards, Marv

    Home Shop Freeware
    https://www.myvirtualnetwork.com/mklotz

  11. The Following User Says Thank You to mklotz For This Useful Post:

    Paul Jones (Sep 4, 2015)

  12. #7
    Supporting Member C-Bag's Avatar
    Join Date
    Aug 2015
    Location
    California, central coast
    Posts
    720
    Thanks
    689
    Thanked 876 Times in 471 Posts

    C-Bag's Tools
    holy cow Paul!

  13. The Following 2 Users Say Thank You to C-Bag For This Useful Post:

    Paul Jones (Sep 4, 2015), PJs (Sep 29, 2015)

  14. #8
    Supporting Member Paul Jones's Avatar
    Join Date
    May 2014
    Location
    Del Mar, California
    Posts
    1,231
    Thanks
    5,810
    Thanked 1,440 Times in 655 Posts

    Paul Jones's Tools
    Thanks Marv. I like your adjustable collar added below the drilling/milling head on your Unimat. It is something I have do. It is easy to accidentally let the drilling/milling head slip down and damage parts during setup. Also, I plan to add a separate motor drive for performing longitudinal power feeding.

  15. #9
    nevadablue's Avatar
    Join Date
    Jun 2015
    Posts
    18
    Thanks
    17
    Thanked 11 Times in 7 Posts
    Paul, I found that a standard 1" split collar, as used on line shafts, works great for the column/mill head backup support.
    ---
    Ken

  16. The Following User Says Thank You to nevadablue For This Useful Post:

    Paul Jones (Sep 18, 2015)

  17. #10
    Supporting Member Paul Jones's Avatar
    Join Date
    May 2014
    Location
    Del Mar, California
    Posts
    1,231
    Thanks
    5,810
    Thanked 1,440 Times in 655 Posts

    Paul Jones's Tools
    Thanks Ken, I remember seeing the split collar in the photo for your Unimat setup, and like Marv's version, I thought it would be very useful. Thank you for the advice, Paul

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •