22 year old scrap Daewoo matiz CAR converted to Homemade BACKHOE..

[Tech Paradise]

Hi pals,
This is my homemade DIY backhoe excavator project. A 22year old daewoo matiz car, which would have otherwise gone as scrap, was transformed into a useful backhoe excavator. This machine can be used for farming, cultivating vegetables, digging pond etc. Similar way, very old vehicles can be transformed into useful backhoe, rather than disposing them as scrap, at extremely low cost.

[DIYer]

Thanks Tech Paradise! We've added your Backhoe to our Heavy Equipment category,
as well as to your builder page: Tech Paradise's Homemade Tools. Your receipt:

Backhoe by Tech Paradise

tags: backhoe

[nova_robotics]

Great work. I see in the Youtube comments you added a hydraulic gear pump which is chain driven off the engine. Had you considered using the power steering pump?

[Manitoba Man]

Great work. I see in the Youtube comments you added a hydraulic gear pump which is chain driven off the engine. Had you considered using the power steering pump?

I am pretty sure tha
t little car does not have power steering and if it did the pump would be tiny.

[Tech Paradise]

Great work. I see in the Youtube comments you added a hydraulic gear pump which is chain driven off the engine. Had you considered using the power steering pump?

Thanks friend.I think a hydraulic steering pump, which is a vane pump, will also work for this application. I used a gear pump just because it was available with me..

[Tech Paradise]

I am pretty sure tha
t little car does not have power steering and if it did the pump would be tiny.

Infact this car has power steering. But as you told, the pump is tiny..will not develop the flow rate required for operation of the hydraulic cylinders..

[Jon]

Congratulations Tech Paradise - your Backhoe is the Homemade Tool of the Week!

This is a serious and useful build, and a nice use of a scrap car.

Some more good builds from this week:

Lathe Automatic Stop Switch by Bullet500
Floating Reamer Holder by MachineNZ
Auto Disengagement for Lathe Feedscrew by Bullet500
T-Nut by winkys workshop
Sortimo Rack by Making Stuff
Cake Transporter Height Gauge by mklotz
Disc Grinder by Andrii Pysarenko
Hot Glue Gun Stand by projectswithrich
Jar Opener by orioncons36
Plasma Cutting and Welding Fixture by Frank S
Clamp by orioncons36
Spot Welder by Mr.DK DIY
Adjustable Shooting Board by e_m_maker
Ford Tractor Axle Modification by Frank S
Splatter Shield by Frank S
Sword by SteelCraft
Tee Bolts by Mr. Factotum's Workshop

Tech Paradise - we've added your tool entry to our All Homemade Tool of the Week winners post. And, you'll now notice the wrench-on-pedestal award in the awards showcase in your postbit, visible beneath your username:



And, you'll be receiving a $25 online gift card, in your choice of Amazon (US-only), PayPal, or bitcoin. Please PM me your current email address and award choice and I'll get it sent over right away.

Nice work!