Alignment cones 2x2.75 x30°

[Okapi]

Speaking of protecting things a few days ago while driving mum around shopping I spotted some 'Fire Blankets' in a neat pouch at the local clearance shed. I pulled one out to have a look and seemed to be a very tightly woven glass/kevlar blend, quite flexible and about 3/32" thick. Made to be placed over a stovetop fire but would be handy anywhere to stop weld spatter. On my shopping list for next week.
How big is this folder? Are you making tanks?

Hi Norton, it's a little bit out of subject in the very good post about special centering but be careful with that material to stay always the sime side over when it's not the smooth version which I prefer, the parts of carborandum etc… are difficult to take away and can fell on machines benches when you move it.
Old good quality plastic table sheets are very usable(the can be cut and glued or solded freely), resist not too bad to the heat of metal chips, for fixing the use of photo tape in 50mm. wide make no marks and is acid-free, I hold them all especially fot that purpose, they restit to UV too very well.