I do a lot of finish work fitting up all types of materials this tool I made makes my job go a little smoother check it out https://www.youtube.com/watch?v=Goe82bmvNJk
Printable View
I do a lot of finish work fitting up all types of materials this tool I made makes my job go a little smoother check it out https://www.youtube.com/watch?v=Goe82bmvNJk
PB Machines,
I hear a lot of people claim "amazing new tool". You sir, deserve to make this claim! Brilliant idea and first rate implementation. Of course, as soon as I saw your video, I knew I wanted one. While you have built a Rolls Royce, I have gone for a rusty 50 cc scooter:
Attachment 34517 Attachment 34518
I took one longer 2x4 block and rounded the end. This turned out to not be necessary. Rounding the corners would have been enough.
The shorter block was drilled through in 2 places with a #7 . Then I put this shorter block on the end of the longer block and drilled in enough to mark the longer block. Next, I drilled with a 1/4 inch down about 1 inch. I dropped a 1/4 inch ball bearing in each of the holes.
I punched two holes in the sanding belt that lined up with the holes I drilled in the shorter block. Then I ran two pieces of threaded rod down the #7 holes and into the longer block. This formed threads in the smaller block and let me apply tension to the belt.
The ends of the threaded rods contact the ball bearings making it easier to turn. Double nuts locked together let me turn the ends of the rods until the belt is tight.
Lots of room for improvement.
Thanks for the terrific idea!
Rick
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks PB Machines! We've added your Sanding Tool to our Metalworking category,
as well as to your builder page: PB Machines's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-sanding-tool-2"> <img src="/uploads/232251/homemade-sanding-tool-2.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-sanding-tool-2">Sanding Tool</a> <span> by <a href="https://www.homemadetools.net/builder/PB+Machines">PB Machines</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/sanding-block'>sanding block</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks rgsparber! We've added your Sanding Tool to our Sanding category,
as well as to your builder page: rgsparber's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-sanding-tool-3"> <img src="/uploads/232256/homemade-sanding-tool-3.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-sanding-tool-3">Sanding Tool</a> <span> by <a href="https://www.homemadetools.net/builder/rgsparber">rgsparber</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/sanding-block'>sanding block</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
That’s awesome we both got to the same place we just took different paths thanks for watching
Not exactly new though, Had one very similar in the 60's
Thats a great design, congrats. I too have reinvented many tools to do a better job. Well before I knew of this Forum. I'm especially interested in you r inner assembly that keeps the inner tension of the belt.
...Any diagrams of the inner flip over lever. I'm not a plagiarist...just a Toolmaker that appreciated the effort relative to the result gained. Good Onya Mate.
If he invented it with no knowledge of the previous design, the he deserves full credit.Quote:
Originally Posted by Al8236
Rick
Hey thanks for watching back in the 90’s sometime when I first made my tool I did a patient search on my idea there was one sanding block that expanded it was ridiculously over complicated and nothing like my design
Thanks for watching so many ways to expand this device I made my block expand with the least moving parts so it’s easier and faster to make.If get enough interest in my tool I’ll make one for a video
Great idea, well made and looks to me to be very marketable. Thanks for sharing.
Thanks yeah I think so too an investor would be nice oh I like your dog
I would love to see how you made it.Quote:
Originally Posted by PB Machines
First choice - prints.
Second choice - video.
Third choice - a couple photos with the removable plate off.
Fourth choice - back of an envelope sketch.
Thanks for posting.
Great design and I like how easy it is to use. You could market this tool and I would buy it.
video is marked private and therefore unviewable.
