Angle Plates

User Tag List

Results 11 to 14 of 14

Threaded View

Sep 11, 2018, 02:46 AM #1

rossbotics

Supporting Member

Join Date

Dec 2013

Location

Florida

Posts

731

Thanks

1,019

Thanked 1,871 Times in 462 Posts

rossbotics's Tools

Awards Showcase

Total Awards: 11

Angle Plates

Made a new set of angle plates yesterday from 1/2" thick 4140 hardened and ground, I already had a set of plates that were 1/4" thick and another set that was 3/4", but sometimes the 1/4" thick plates aren't wide enough for stability and sometimes the 3/4" thick ones are too wide to fit where I want them.

These new plates are the standard 30°-60°-90° and 45°-45°-90° but I made another plate with an angle that sometimes I could use which is 22.5°, so I made a 3rd plate at 22.5°-22.5°-135° which will come in handy once in a while.

I didn't take any photos of the machining and grinding processes just a couple photos of the comparison of the 3 sets of plates.

As always thanks for looking and happy machining

Doug

300+ new builds daily: cars, trucks, bikes, fabrication → BuildThreads.com

Comments are always welcome
Doug

Subscribe to my you tube channel

https://www.youtube.com/channel/UCDD..._as=subscriber

Tool Plans for Sale by rossbotics

Reply With Quote
The Following 13 Users Say Thank You to rossbotics For This Useful Post:

aphilipmarcou (Sep 11, 2018), high-side (Oct 5, 2020), jjr2001 (Sep 11, 2018), Jon (Sep 11, 2018), LMMasterMariner (Sep 11, 2018), n9dug (Oct 3, 2020), NortonDommi (Sep 19, 2018), old_toolmaker (Sep 11, 2018), Paul Jones (Sep 11, 2018), PJs (Sep 12, 2018), Seedtick (Sep 11, 2018), volodar (Sep 12, 2018), zarembak (Sep 11, 2018)