APU Generator mount bracket

[Frank S]

We've had this 6KW APU sitting in my storage for over a year now so it was high time to put it to use.
Bob showed up with a new toy to add to my collection and needing to take his reset for his electronic logbook
What better time than now to mount the APU

This is the bracket I had to make to mount it with On 1 side I was able to use a bought bracket and only had to make a 2 1/2 x2 1/2" angle bracket by drilling 5 holes in it on the other side I didn't have the room due to a cross member so what I did was to use a 3 x3 angle I drilled 5 holes in it 2 to match holes already used to hold the exhaust support brace and 3 to bolt a transition angle with 5 holes in it the opposite of the angle I made for the other side

[DIYer]

Thanks Frank S! We've added your APU Generator Bracket to our Miscellaneous category,
as well as to your builder page: Frank S's Homemade Tools. Your receipt:

APU Generator Bracket by Frank S

tags: mount