One of my previous videos had only the design and drawings of the lever metal bender. Now you can see how it works. I also made a mistake hopefully you will avoid...
You can get pdf plans per request to my e-mail which is published in the video. Subscription to my youtube channel is here:
https://www.youtube.com/channel/UCpb...confirmation=1
Thank you for your support.
12L14 (Jul 31, 2019), Altair (Mar 19, 2019), Andyt (May 2, 2019), baja (Jun 13, 2019), Dorn (Mar 13, 2019), Frankd68 (Mar 13, 2019), high-side (Mar 13, 2019), IAMSatisfied (Mar 20, 2019), Janvosburg (Mar 13, 2019), Jon (Mar 14, 2019), Okapi (Mar 18, 2019), Resident114 (Mar 12, 2019), Scotsman Hosie (Mar 18, 2019), sossol (Mar 12, 2019), that_other_guy (May 25, 2019), tooly (May 1, 2019), UncleBob (Mar 12, 2019)
Good idea of a well known tool reinterpretation, you can add an articulated length gauge if you have many identical angles to make.
TilenThaler (Mar 18, 2019)
Great idea.
As you have holes on your piece, you can make an adjustable length and angle in a unique arm from them, which can be rotated from necessary position to free working place.
 by that_other_guy - Two great ideas here:
1) the bender itself, and
2) that wall-mounted vertical vise.
Great ideas!
Thanks for sharing. "Pin It")
Two great ideas here:
1) the bender itself, and
2) that wall-mounted vertical vise.
Great ideas!
Thanks for sharing.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks