DIY Circle Center Finder

[Downeast Thunder]

FREE Drawing! Details below.

The DIY homemade circle center finder tool shown in this video only took a few minutes to make and cost me nothing in terms of out-of-pocket funds.

I have several of the small plastic speed squares around the shop, so I sacrificed one of them for this project. I had some scrap ¾” birch plywood, and plenty of #8 x ¾” stainless steel, flathead, screws on hand. This handy tool would still be quite inexpensive if I had to buy the materials though, and well worth it!

Materials:
(1) 8” x 8” square piece of ¾” birch plywood
(1) small plastic speed square
(3) #8 x ¾” stainless steel flathead sheet metal screws
Actual time to make: About 20 minutes.

Link to Free Drawing (pdf Format): http://www.downeastthunder.com/wp-co...ter-Finder.pdf

Here's the video: