DIY Powered Disc Sander

**HandmadeCreativeChannel** · Dec 6, 2020, 02:14 AM

DO NOT THROW THE OLD WASHING MACHINE MOTOR IN THE TRASH / DIY Powered Disc Sander.I will show you an easy way to create a disc sander, I will use wood and two-component poxypol glue with which I will glue the sandpaper. I will show you how easy it is to remove the old sandpaper from the wooden disk. These are steps that I think will be useful to you in making a disk sander. Thank you for your attention. In the video you will see a box that is adapted for the electric motor. I will leave links for videos in which I show how you can wiring an electric motor.
====================================================

======== This is links for How to wiring washing machine motor =======
Subscribe My Channel - http://tiny.cc/c3zq9y

**TheElderBrother** · Dec 8, 2020, 05:25 AM

This is the complete program I was hoping for. I don't know a lot about electronics and electrical work. (I was struck by lightning as a teenager, so I always avoided it until more recently. And I still don't love it.)

Outstanding series!

**terryjs** · Dec 8, 2020, 08:34 PM

Great idea! I have made a similar sander but rather than glue I have used a 178mm Backing Pad Hook & Loop Converter ( https://tinyurl.com/y62lwe2b ) and I use pads with Hook & Loop backing (https://tinyurl.com/y62lwe2b)