DIY Powered Disc Sander

[HandmadeCreativeChannel]

DO NOT THROW THE OLD WASHING MACHINE MOTOR IN THE TRASH / DIY Powered Disc Sander.I will show you an easy way to create a disc sander, I will use wood and two-component poxypol glue with which I will glue the sandpaper. I will show you how easy it is to remove the old sandpaper from the wooden disk. These are steps that I think will be useful to you in making a disk sander. Thank you for your attention. In the video you will see a box that is adapted for the electric motor. I will leave links for videos in which I show how you can wiring an electric motor.
====================================================

======== This is links for How to wiring washing machine motor =======
Subscribe My Channel - http://tiny.cc/c3zq9y

[DIYer]

Thanks HandmadeCreativeChannel! We've added your Disc Sander to our Disc Sanders category,
as well as to your builder page: HandmadeCreativeChannel's Homemade Tools. Your receipt:

Disc Sander by HandmadeCreativeChannel

tags: disc sander, motor

[TheElderBrother]

This is the complete program I was hoping for. I don't know a lot about electronics and electrical work. (I was struck by lightning as a teenager, so I always avoided it until more recently. And I still don't love it.)

Outstanding series!

[terryjs]

Great idea! I have made a similar sander but rather than glue I have used a 178mm Backing Pad Hook & Loop Converter ( https://tinyurl.com/y62lwe2b ) and I use pads with Hook & Loop backing (https://tinyurl.com/y62lwe2b)