DIY RELOADING PRESS

**celsoari** · Jan 11, 2023, 10:45 AM

how to make your own reloading press, step by step with measurements

Greetings from Brazil
Celso Ari

**alainbiggun** · Jan 11, 2023, 05:11 PM

super!! i love it: i am a shooter..

**tlnixon** · Jan 11, 2023, 05:54 PM

Now someone builds a press...After I have bought 6 Lee presses and one RCBS. LOL!!!! Fantastic-looking work. Great concept to rotate the die plate instead of the shell holder like Lee does. If there is enough room between the die plate and ram, once could load .50 caliber just by building another plate and drilling and tapping it for the larger dies.

**alainbiggun** · Jan 11, 2023, 06:27 PM

oui.excellent design,all steel...like as Lyman Turret

perhaps one day an automatic rotation?

**Frank S** · Jan 11, 2023, 06:43 PM

What do you have for powder metering

**DIYer** · Jan 12, 2023, 03:56 AM

Thanks celsoari! We've added your Reloading Press to our Firearm and Weaponry category,
as well as to your builder page: celsoari's Homemade Tools. Your receipt:

Reloading Press by celsoari

tags: reloading

**celsoari** · Jan 12, 2023, 04:21 AM

Originally Posted by tlnixon

Now someone builds a press...After I have bought 6 Lee presses and one RCBS. LOL!!!! Fantastic-looking work. Great concept to rotate the die plate instead of the shell holder like Lee does. If there is enough room between the die plate and ram, once could load .50 caliber just by building another plate and drilling and tapping it for the larger dies.

with the proper dies it is possible to make from .32 to 556 Nato

greetings from Brazil
Celso Ari

**celsoari** · Jan 12, 2023, 04:22 AM

Originally Posted by Frank S

What do you have for powder metering

I don't know the name in English, here guidelines for "polvorimetro"

**hemmjo** · Jan 12, 2023, 04:51 AM

Originally Posted by tlnixon

Now someone builds a press...After I have bought 6 Lee presses and one RCBS. LOL!!!! Fantastic-looking work. Great concept to rotate the die plate instead of the shell holder like Lee does. If there is enough room between the die plate and ram, once could load .50 caliber just by building another plate and drilling and tapping it for the larger dies.

Depending on what specific 50 caliber round you are thinking about, there may not be enough travel for the cartridge length, or enough strength to properly resize that large case.

**meyer77** · Jan 12, 2023, 04:59 AM

I don't remember the name right now (Hollywood I think) but back in the 50's-60's there was a similar press like this but the center shaft was about 4-5" in diameter ant the top plate held 6-8 dies, powder measure etc.
What kind of license/permit is needed to own a firearm in Brazil. My daughter in law is from Brazil.