Free 186 More Best Homemade Tools eBook:  
New: 300+ fresh build posts/day from 275 forums → BuildThreads.com

User Tag List

Page 2 of 2 FirstFirst 1 2
Results 11 to 16 of 16

Thread: DIY Remote Controlled Tractor (Cuts Grass)

  1. #11
    Supporting Member
    Join Date
    Jun 2019
    Posts
    11
    Thanks
    1
    Thanked 46 Times in 7 Posts

    m2rechtin's Tools
    Quote Originally Posted by jjr2001 View Post
    Well, I hope this was shown as something not to do. Kinda like the guy that was drawn into a lathe and was crushed.
    I did not see any sensors that would stop the 10hp plus killer if it were about to run into a child or animal.
    RC equipment can and does fail so the start/stop control might work if the operator sees the problem in time.
    YIKES!

    What is next? A remote controlled chain saw?

    Cheers, JR

    JR. Thanks for the reply and the concern. Obviously, there is some element of danger any time you are operating a lawn mower no matter where you are driving it from. Loss of signal issues as well as hardware failures are taken into account in the software and the tractor with automatically shut itself down. Also, as you might notice we were using it in a wide open field just in case. Obstacle detection will for sure be added in the future especially before we let it do anything autonomous. We are doing things safely and testing the failure modes. (Just didn’t film it because that would be a pretty boring video)

    Also I think you’re on to something with the RC chainsaw idea. Haha

    Thanks,
    Michael

  2. #12
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    12,615
    Thanks
    2,677
    Thanked 11,103 Times in 5,386 Posts

    Frank S's Tools
    When thinking about a RC chainsaw I'd like to have one of those to trim the tops of some of my trees.
    But a large robust model could really be of a lot of use to the firefighters in the forests
    Never try to tell me it can't be done
    When I have to paint I use KBS products

  3. #13
    Supporting Member IntheGroove's Avatar
    Join Date
    May 2019
    Location
    Lake Tahoe
    Posts
    2,493
    Thanks
    274
    Thanked 1,378 Times in 828 Posts

    IntheGroove's Tools
    Flying chainsaws would be fine touch to 2020...

  4. The Following User Says Thank You to IntheGroove For This Useful Post:

    toeless joe (Sep 6, 2020)

  5. #14
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    12,615
    Thanks
    2,677
    Thanked 11,103 Times in 5,386 Posts

    Frank S's Tools
    Quote Originally Posted by IntheGroove View Post
    Flying chainsaws would be fine touch to 2020...
    No what we really need for 2020 is the attack of the killer tomatoes the FOG or the Blob rolling through the cities or maybe a couple good old sharknados
    Never try to tell me it can't be done
    When I have to paint I use KBS products

  6. #15
    Supporting Member tonyfoale's Avatar
    Join Date
    Nov 2016
    Location
    Spain
    Posts
    1,821
    Thanks
    834
    Thanked 3,238 Times in 910 Posts

    tonyfoale's Tools
    I bought a ride on mower about a year ago. I do not want my fun taken away. Before you know it they will want us to use self drive cars.

  7. #16
    Supporting Member bob_3000's Avatar
    Join Date
    Aug 2020
    Posts
    1,015
    Thanks
    606
    Thanked 418 Times in 308 Posts
    Quote Originally Posted by m2rechtin View Post
    JR. Thanks for the reply and the concern. Obviously, there is some element of danger any time you are operating a lawn mower no matter where you are driving it from.
    I feel like this is one of those "just spend the money and buy the proper tool" moments.

    They're only five thousand dollars and you could avoid maiming or killing someone or something.

    And there's not a chance in this world you would get that thing insured.

    https://www.rcmowersusa.com/



    2,500+ Tool Plans

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •