Thanks, mate, it was a labour of love making it. The interface with the saw is magic. Pulley on arbour, base of sander has cleat into mitre slot, adjust blade height for tension and voila! Ready to go, it takes me more time to climb up on the outfeed table to lower it down from hoist above than to hook up. Dedicated hose to extractor as well. Slow, but good results considering investment. I don't use that often but always a joy when I do...Also have a shaft with 8x 200 x25mm wire brushes for grain relief. Works a treat on any timber, even veneered part board! I'll send a photo of a wall unit I did a coupla years ago with brushed Tas Oak. Came up a treat! Good work with the lazy susan, always good to give something a second life..cheers
Jim