Quote Originally Posted by metric_taper View Post
That seems like a perfect use, especially if you have to adjust an over center clamp on the jig for different material thicknesses.
I was just doing some pocket holes last week. My jig is a cheap knock off of a Craig, and not designed to adjust for various board thicknesses. So I usually take the part out with the drill bushing, and C-clamp it to the board so the screw gets located in the correct place.
I see your from the US so I got this link for you .I have what looks to be the same jig but purchased in Australia.I thought this one would be better for my purpose due to the thick ally base and I also thoght in the future I might be able to extend it to allow more than 2 holes to be drilled at once https://www.harborfreight.com/portab...kit-96264.html