Quote Originally Posted by Frank S View Post
Must be one of the reasons why I am constantly on the prowl for equipment.
Also convenient we have different connections, and hopeful end results. Staying within boundaries of my property lines is an exasperation too; hindrance of calculable restrictions. Very careful delegating floor space. What's there, is well proportioned to each other, based on workspaces I've been in over the years.

Speaking of which, are any members within 3-400 miles of Kansas City; equipped minimally with a
Bridgeport sized CNC, 2 or 3 axis. I have vise fixtures built for this job, suitable for Kurt style jaws.
or
40 ton + ironworker with a 20" fixturing table or Strippet/ Roper-Whitney single end fabricator
or
a clean running CNC laser burn table

I need 660+ obround slots for 1/4" or 5/16" 2 or 3 inches long CTC, for carriage bolt heads in 220 parts; clean 10 gauge HRPO 2.5" X 14.5". There will be corresponding bolt holes in 220 matching parts. These are brackets to suspend electrical wireway from the over head so I can begin wiring the building. I expect to compensate for using or aiding the job in your shop. They are packed, ready for me to load and transport.