Flip top welding table

[Al8236]

I made this a couple of years ago so it's not new. But with spring here I wanted to use the forge and thought I might as well take a couple of pictures as long as I had to un-bury it from the winters accumulation of stuff that got stacked around it.
Don't give me a bad time I still have a bunch of spring cleaning to do!
As a welding table

And with the top open for use as a forge.
The pan is 2" deep with a brake drum in the center for the fire pot, The tuyere has a flip gate on the bottom for clean out of ash and clinkers and the blower was salvaged from the forced air of a wood stove.

Now to get around to attaching the blower with something other than gaffers tape!