Forklift turns around street pole barrier - GIF

Forklift turns around street pole barrier.

<video controls autoplay loop>
<source src="https://s3-us-west-1.amazonaws.com/hmt-forum/forklift_turns_around_street_pole_barrier.mp4" type="video/mp4">
Your browser does not support the video tag.
</video>


Previously:

https://www.homemadetools.net/forum/...455#post116927
https://www.homemadetools.net/forum/...953#post140678
https://www.homemadetools.net/forum/...693#post139861
https://www.homemadetools.net/forum/...598#post132598
https://www.homemadetools.net/forum/...367#post127013
https://www.homemadetools.net/forum/...289#post121698
https://www.homemadetools.net/forum/...720#post123927

No dullard bollards are going to stop that guy from his work.

I'd higher him, then tell him to take it a little easier on the lift, seems he hit the bollard with the tire just before the turn a little harder than nesicary.
Eric

Nix that. After watching again it seems the tire does not touch. Yup I'd hire him.
Eric

Looks like his first day on the job!

There's a company in Chicago located on a street that's too tight for a big truck to get into for deliveries so what they do is give you instructions to start making the turn, go as far as you can go and then stop and call the shop foreman, who sends out a bigass forklift that lifts and moves the rear of the trailer over so that you can finish the turn.

Forklifts is wonderful things.