User Tag List

Results 1 to 10 of 13

Thread: Hi, and thanks

Apr 2, 2018, 01:02 PM #7

old_toolmaker

Supporting Member

Join Date

Dec 2017

Location

Cape Coral, FL

Posts

579

Thanks

647

Thanked 533 Times in 232 Posts

old_toolmaker's Tools

Awards Showcase

Total Awards: 5

threesixesinarow,

I also did an adaptation of the Unimat head stock.
I have adapters made to mount the Unimat head stock in vertical mode on my mini lathe and also it can mount horizontally on the cross slide to do drilling and slotting as for key ways.

Dick

Dick

Links to some of my plans:

https://www.homemadetools.net/forum/...965#post105972 OFF-SET TAILSTOCK CENTER PLANS
http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS
http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS
http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET
http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION

Reply With Quote
The Following User Says Thank You to old_toolmaker For This Useful Post:

Paul Jones (May 26, 2018)