Printable View
Hi! My homemade metal bender. Made of metal sheet thickness of 10mm.
Attachment 15942 Attachment 15943 Attachment 15944 Attachment 15945 Attachment 15946 Attachment 15947 Attachment 15948 Attachment 15949 Attachment 15950 Attachment 15951 Attachment 15952 Attachment 15953 Attachment 15954 Attachment 15955 Attachment 15956 Attachment 15957 Attachment 15958 Attachment 15959 Attachment 15960 Attachment 15961
Later paint and produce rolls for shafts
Roller for square tubes, washers movement can change the width
Attachment 16031
When you make your rollers I believe you will find that stacking the washers to take up the entire open area will be better than trying to set screw them in place
Vyacheslav.Nevolya, I agree with Frank S that stacking washers or parting off sets of tubing would be more effective. Best might be a spacer AND a free-spinning washer to reduce galling the materials edge; bending will cause it to widen somewhat.Quote:
Originally Posted by Frank S
After painting
Attachment 16037
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Vyacheslav.Nevolya! We've added your Bender to our Metalworking category,
as well as to your builder page: Vyacheslav.Nevolya's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-bender-8"> <img src="http://www.homemadetools.net/uploads/164069/homemade-bender-8.png"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-bender-8">Bender</a> <span> by <a href="http://www.homemadetools.net/builder/Vyacheslav.Nevolya">Vyacheslav.Nevolya</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/bender'>bender</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Браво,отлично
Very impressive!
Do you have a video of it in use?
Vyacheslav,
I always like seeing your posts. I have been thinking for some time to make one of these but I need it for thin wall tubing in the 38 to 52mm range.
Was unable to complete the project, a lot of time spent in hospital and work on the project was stopped. In the near future i be made rollers and upload video.
