LinkBack URL
About LinkBacks
Over the last few weeks I've been working on a hose reel bracket to mount a large hose reel at the front center of the garage. The hose reel will site between the two front garage doors and has to clear the door tracks. I recessed the hose reel up in to the truss bay....
The first step was to shear out some pieces of steel on the Piranha Iron Worker. Luckily I had some steel left over from another project.
Then I punched some holes and changed out to the press brake. I bent the two offset flanges.
Time for a check of how it was progressing:
Reply With Quote
Bookmarks