Quote Originally Posted by Henri View Post
Hi guys, interesting post, thank you very much. I use a pressure type simple two-wheel knurler and, frankly, it is a pain in the butt. But what I would love to know about this kit above, what length of cut can it do? I use my little knurler to do motorcycle foot pegs, for example, which means I would have to be able to knurl a length of, say, 180mm and a stock thickness of about 35mm. Would your type of knurler do that?
Henri,
For Quick Knurl types the length one can knurl is dependent on the diameter of the work: if it is less than 20mm it can pass through the body of the chuck so there is no limit to work length. Other than that one is limited to the chuck depth plus the length of the "arms" . Unless there is a giant version of this Quick Knurler then you have to stick to the pressure type for those motorcycle foot pegs, I think. The again there might be some sort of quick knurler that fits in the tool post?