User Tag List

Results 1 to 6 of 6

Thread: Lathe Tap and Die holders for the Sherline Lathe MT0 tail stock

Jul 13, 2020, 07:19 PM #3

old_toolmaker

Supporting Member

Join Date

Dec 2017

Location

Cape Coral, FL

Posts

579

Thanks

647

Thanked 535 Times in 233 Posts

old_toolmaker's Tools

Awards Showcase

Total Awards: 5

JR,
Nice job on the mini lathe die holder.
I made one to fit my 11” Logan a few years back. I no longer have the Logan so now the die holder lives on my 7x16 MicroMark.
I chuck up a 3/8” drill blank and the die holder floats on that. I have a coarse knurl grip on the O.D. and the 1” round dies are held in a counterbore with cone point set screws. Works great.

Dick

Links to some of my plans:

https://www.homemadetools.net/forum/...965#post105972 OFF-SET TAILSTOCK CENTER PLANS
http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS
http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS
http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET
http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION

Reply With Quote
The Following User Says Thank You to old_toolmaker For This Useful Post:

jjr2001 (Jul 14, 2020)