A Light Duty Deep Socket

[rgsparber]

I needed a deep socket but had none. Rather than run out to the store for something I’d probably never use again, I slapped one together from scrap and available regular sockets.

If you are interested, please, click here


Your comments are welcome. All of us are smarter than any one of us.


Thanks,

Rick

[ductape]

Instead of the hose clamp, one could use a shaft collar with the screw close to the slit. It should hold almost as well without the protruding screw. They are admittedly less common and have a narrower range than hose clamps, though.

[DIYer]

Thanks rgsparber! We've added your Deep Socket to our Fastening category,
as well as to your builder page: rgsparber's Homemade Tools. Your receipt:

Deep Socket by rgsparber

tags: specialty socket