Locking Mechanism for Safety Bar on All Terrain Track Chair

Hey guys,
Here's the locking mechanism for the safety bar on the All Terrain Track Chair.
Using Air cylinders to raise and lower the bar, and at the same time it locks and unlocks the bar in position. Loss of air pressure will automatically unlock the safety bar and allow it to raise via springs.
A simple air switch is used to activate it up and down.

Part 1 shows the unit during early testing:
https://www.youtube.com/watch?v=NXK8LS_OBE8

Part 2 shows the unit after all the air system is plumbed with the correct valves & flow controls to make it move nice and slow.
https://www.youtube.com/watch?v=iumH68_115s

This video shows a close up of the locking mechanism:
https://www.youtube.com/watch?v=ZZxJo1zbdtE

For those folks just tuning in, here's an overview of the entire project:
All Terrain Track Chair (ATTC) - Kustom's by Kent

Thanks
Kent

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks KustomsbyKent! We've added your ATTC Locking Mechanism to our Automotive category,
as well as to your builder page: KustomsbyKent's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-attc-locking-mechanism"> <img src="/uploads/205283/homemade-attc-locking-mechanism.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-attc-locking-mechanism">ATTC Locking Mechanism</a> <span> by <a href="http://www.homemadetools.net/builder/KustomsbyKent">KustomsbyKent</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/safety'>safety</a>, <a href='http://www.homemadetools.net/tag/pneumatic'>pneumatic</a>, <a href='http://www.homemadetools.net/tag/locking'>locking</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->