Logan 11" Lathe Carriage Stop

[Catfish]

A Carriage Stop for my Logan 11" Turret lathe. Made from 6061 Alu, 316 Stainless clamp plate, Brass Dial, Drill Rod shaft. Made from scrap from around the shop. Contact me for drawings and I will email.

[kbalch]

Thanks Catfish! I've added your Lathe Carriage Stop to our Machining category, as well as to your builder page: Catfish's Homemade Tools. Your receipt:

Lathe Carriage Stop by Catfish

tags: lathe, carriage stop

[jgairguns]

Thanks, that looks exactly like what I need. I would appreciate the drawings you mentioned in your post. I want to adapt it to a 7x10 mini lathe. John jgairguns@sbcglobal.net

[Caboose]

Very nice, I made a very crude stop out of cast iron, please email your drawing, it's time for an upgrade!
Rnjtalbott@gmail.com

[DIYer]

Great stop, Catfish. Turned out really well.

[kingerswa]

can you send a set of drawings to kingerswa@frontier.com

Thanks

[Pete Fowler]

Hey Catfish! Nice stop. I'm pretty new to lathe work so haven't got one of these made yet. Be cool to see the drawings if you can send them to me. Thanks a lot : )
peterphilipfowler@gmail.com

[lo7us]

Thanks, that looks exactly like what I need. I would appreciate the drawings you mentioned in your post. I want to adapt it to a 7x10 mini lathe. John jgairguns@sbcglobal.net

Yes I would also appreciate you sending me the drawings to make one. This is very nice and a lot better than my present one! Thank you, saguto@gmail.com

[rbutlerr]

I know where Mariposa is, I worked in Yosemite during the summer of 60 and 61 while going to school. I would love a set of drawings. rbutlerr@charter.net Hope to adapt to my 1024 Jet. Thank you for your hard work. Ron

A Carriage Stop for my Logan 11" Turret lathe. Made from 6061 Alu, 316 Stainless clamp plate, Brass Dial, Drill Rod shaft. Made from scrap from around the shop. Contact me for drawings and I will email.

[toyman]

I would like a set of drawings, too, please.
Thanks
Joe M.
toyman@sbcglobal.net