Making a Deburring Tool from a Razor Handle

[Paul Jones]

Quick Update:

I made a minor modification to the razor handle deburring tool by using a small 1/16" dia. ball bearing at the bottom of the set screw hole for better trapping the E100 and S100 type deburring cutters from Shaviv.

This allows the vee-recess in the deburring cutters to move freely and easily rotate against the smooth surface of the ball bearing. The ball bearing is loosely trapped at the bottom of the side hole with a 6-32 cup-end set screw. I used the green wicking type 290 Locktite to hold the set screw in place but it can be easily removed for replacing the deburring cutters as needed.

Thanks for looking,
Paul Jones