Making miniature nut drivers

In the days before I treated myself to a nice set of Wiha nut drivers, I needed a slim profile nut driver for mounting some thread lock 2-56 nuts on a model engine. There was no clearance to use a wrench and the thread lock feature meant more than average torque was required to seat them; a nut driver was the only practical solution.

I happened to have some stainless shoulder bolts that took a 1/8" AF Allen wrench and the 2-56 nuts were also 1/8" AF. I threaded a stainless rod handle to match the 10-32 thread on the shoulder bolt and Loctited the bolt into the handle. Then the bolt head was turned down to a profile that would allow the nut driver to work in the available access area.

This photo shows the shoulder bolt on the left and the nut driver business end on the right. Front center is a 2-56 bolt with one of the nuts.

https://s3-us-west-1.amazonaws.com/f...e/101635-1.jpg

Here's another photo showing a side view of the components.

https://s3-us-west-1.amazonaws.com/f...e/101635-2.jpg

Of course, forging your own hex holes can be done but reworking a SHCS or similar is generally a lot easier for the novice machinist.

Thanks Marv, the use of the socket head of a bolt is a great idea. Just turn the head down to the desired outside diameter then screw a handle on the bolt

That's very cool, never occurred to me to use allen bolt heads as wrenches.

Thanks mklotz! We've added your Miniature Nut Driver to our Fastening category,
as well as to your builder page: mklotz's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-miniature-nut-driver"> <img src="/uploads/206318/homemade-miniature-nut-driver.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-miniature-nut-driver">Miniature Nut Driver</a> <span> by <a href="http://www.homemadetools.net/builder/mklotz">mklotz</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/nut-driver'>nut driver</a> </div> </div> </div> </div>

Why didn't I think of that? That is a very logical idea. probably too simple when yo

Quote:

Originally Posted by mklotz

In the days before I treated myself to a nice set of Wiha nut drivers, I needed a slim profile nut driver for mounting some thread lock 2-56 nuts on a model engine. There was no clearance to use a wrench and the thread lock feature meant more than average torque was required to seat them; a nut driver was the only practical solution.

I happened to have some stainless shoulder bolts that took a 1/8" AF Allen wrench and the 2-56 nuts were also 1/8" AF. I threaded a stainless rod handle to match the 10-32 thread on the shoulder bolt and Loctited the bolt into the handle. Then the bolt head was turned down to a profile that would allow the nut driver to work in the available access area.

This photo shows the shoulder bolt on the left and the nut driver business end on the right. Front center is a 2-56 bolt with one of the nuts.

https://s3-us-west-1.amazonaws.com/f...e/101635-1.jpg

Here's another photo showing a side view of the components.

https://s3-us-west-1.amazonaws.com/f...e/101635-2.jpg

Of course, forging your own hex holes can be done but reworking a SHCS or similar is generally a lot easier for the novice machinist.

That is a very logical idea. probably too simple when you'r under pressure. Often the best ideas are so simple they get overlooked.

Thanks for the post. I have used this in the past myself.
LaVern

That is a very logical idea. probably too simple when you're under pressure. Often the best ideas are so simple they get overlooked.

I've singled out that quote, not who wrote it, because we all suffer that on occasion. And far too often the simplest ideas have been capitalized on, we run out and buy them without a second thought...
Really, it's more rewarding to solve and create then let some one else get the credit. Expand capabilities. Save resources for what you cannot do, or aren't ready for.

Congratulations mklotz - your Miniature Nut Driver is the Homemade Tool of the Week!

Clever use of a bolt, and this one certainly also wins the "Why Didn't I Think of That?" award. This is often a rhetorical question, but it's also a perfectly legitimate real question - why didn't I think of that?

This is related to a cognitive bias called Hindsight bias. More specifically, a clever idea that seems obvious after the fact is called an Egg of Columbus. This concept takes its name from a most likely apocryphal story involving Christopher Columbus. As the tale goes, Columbus was told that his discovery of the Americas was actually an easy task. In response, Columbus then challenged his critics to make an egg stand on its tip. When they failed, Columbus tapped the egg on the table, breaking and flattening one end of its shell so that it indeed stood upright. Nikola Tesla famously demonstrated his own "Egg of Columbus" device in 1893, with a copper egg in a rotating magnetic field.

The Egg of Columbus tale is nicely depicted in this 1752 engraving by William Hogarth.

https://diqn32j8nouaz.cloudfront.net...us_carving.jpg

Some nice entries this week: a Tailstock Pressure Pad by olderdan, a Wood Lathe Live Center by Tuomas, a Four Dollar Slapper by yhprum, an Angle Grinder Wall Rack by Frank S, a Tractor Step by vaughn45, and a Retractable Guide Mount by carrdo.

mklotz - we've added your tool entry to our All Homemade Tool of the Week winners post. And, you'll be receiving a $25 online gift card, in your choice of Amazon, PayPal, or bitcoin. Please PM me your current email address and gift card choice and I'll get it sent over right away.

This is your 11th Homemade Tool of the Week win. Here are all of your winning homemade tools:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/bore-measurement-gauge"><img src="https://www.homemadetools.net/uploads/128390/bore-measurement-gauge.jpeg"/></a></div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/bore-measurement-gauge">Bore Measurement Gauge</a> <span> by <a href="/builder/mklotz_3">mklotz</a></span> </div> <div class="tags">tags: <a href="https://www.homemadetools.net/tag/gauge">gauge</a>, <a href="https://www.homemadetools.net/tag/dial-indicator">dial indicator</a>, <a href="https://www.homemadetools.net/tag/measurement">measurement</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/miniature-indexing-faceplate"><img src="https://www.homemadetools.net/uploads/137534/miniature-indexing-faceplate.jpeg"/></a></div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/miniature-indexing-faceplate">Miniature Indexing Faceplate</a> <span> by <a href="/builder/mklotz_3">mklotz</a></span> </div> <div class="tags">tags: <a href="https://www.homemadetools.net/tag/indexing-unit">indexing unit</a>, <a href="https://www.homemadetools.net/tag/collet">collet</a></div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/pocket-tools"> <img src="/uploads/145547/pocket-tools.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/pocket-tools">Pocket Tools</a> <span> by <a href="https://www.homemadetools.net/builder/mklotz_3">mklotz</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/magnet'>magnet</a>, <a href='https://www.homemadetools.net/tag/measurement'>measurement</a> </div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/bench-block-clamping-setup"> <img src="/uploads/150835/bench-block-clamping-setup.png"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/bench-block-clamping-setup">Bench Block Clamping Setup</a> <span> by <a href="https://www.homemadetools.net/builder/mklotz_3">mklotz</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/clamp'>clamp</a>, <a href='https://www.homemadetools.net/tag/v-block'>V-block</a> </div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/model-cement-mixer"> <img src="/uploads/150935/model-cement-mixer.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/model-cement-mixer">Model Cement Mixer</a> <span> by <a href="https://www.homemadetools.net/builder/mklotz_3">mklotz</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/mixer'>mixer</a>, <a href='https://www.homemadetools.net/tag/cement'>cement</a> </div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-sphere-drilling-jig-2"> <img src="/uploads/157829/homemade-sphere-drilling-jig-2.png"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-sphere-drilling-jig-2">Sphere Drilling Jig</a> <span> by <a href="https://www.homemadetools.net/builder/mklotz_3">mklotz</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/jig'>jig</a>, <a href='https://www.homemadetools.net/tag/drilling'>drilling</a> </div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-countersink-gage"> <img src="/uploads/163541/homemade-countersink-gage.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-countersink-gage">Countersink Gage</a> <span> by <a href="https://www.homemadetools.net/builder/mklotz_3">mklotz</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/measurement'>measurement</a> </div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-bench-motor"> <img src="/uploads/164649/homemade-bench-motor.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-bench-motor">Bench Motor</a> <span> by <a href="https://www.homemadetools.net/builder/mklotz_3">mklotz</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/chuck'>chuck</a>, <a href='https://www.homemadetools.net/tag/motor'>motor</a> </div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-lathe-height-gauge"> <img src="/uploads/165801/homemade-lathe-height-gauge.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-lathe-height-gauge">Lathe Height Gauge</a> <span> by <a href="https://www.homemadetools.net/builder/mklotz_3">mklotz</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/lathe'>lathe</a>, <a href='https://www.homemadetools.net/tag/height-gauge'>height gauge</a> </div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-sensitive-drilling-platform"> <img src="/uploads/168553/homemade-sensitive-drilling-platform.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-sensitive-drilling-platform">Sensitive Drilling Platform</a> <span> by <a href="https://www.homemadetools.net/builder/mklotz_3">mklotz</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/drilling'>drilling</a> </div> </div> </div> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-miniature-nut-driver"> <img src="/uploads/206318/homemade-miniature-nut-driver.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-miniature-nut-driver">Miniature Nut Driver</a> <span> by <a href="https://www.homemadetools.net/builder/mklotz">mklotz</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/nut-driver'>nut driver</a> </div> </div> </div> </div>

Many thanks. I feel a tad guilty but console myself with the fact that ideas are as important to tool making as the actual construction is.

Columbus didn't need to break the egg. All he needed to do was hard boil it and then spin it. Even if started with the principal axis horizontal, the egg will soon stand up with its axis vertical. In fact, this is the non-destructive way to differentiate raw from boiled eggs.

Thanks for the idea, I would need to drill the bolt so I could tighten nuts not just bolts.

Ralph

I really like the little round vise in the photo, Is that another one of your creations? very neat.

Quote:

Originally Posted by drivermark

I really like the little round vise in the photo, Is that another one of your creations? very neat.

No, it's a commercially available device...

https://www.amazon.com/Jewelers-Adju...ords=hand+vise

I never found the handle very useful so I removed it and turned a fitting so it can be clamped to the work table. Also, as supplied, the pins are only a sloppy fit in the holes and things clamped with them tend to "squeeze" upward freeing themselves. I measured the holes with pin gauges and turned some very close-fitting pins. That solved that problem.

Although the picture shows it used as a more ordinary pinch vise, its real forte is clamping odd-shaped objects not easily held in a conventional vise. In addition to the pins themselves, one can make little corners or radiused jaws to fit over the pins. The pins can fit inside cavities on certain parts and thus hold it with its exposed surface fully available for filing, painting, etc.

A very versatile tool that probably belongs in the arsenal of anyone who deals with small intricate, hard-to-hold parts.

Great idea Marv

Quote:

Originally Posted by mklotz

Columbus didn't need to break the egg. All he needed to do was hard boil it and then spin it. Even if started with the principal axis horizontal, the egg will soon stand up with its axis vertical. In fact, this is the non-destructive way to differentiate raw from boiled eggs.

As if I don't waste enough of my time on this wonderful website. Now I have to hard boil an egg and give it a spin to satisfy myself that this will really work. I am assuming it has something to do with gyroscopic precession but perhaps there is a simpler explanation. Can anyone enlighten me?

Couldn't wait for an answer so I Googled it as I should have done in the first place. Apparently the problem has been studied for hundreds of years and was only solved in 2002.
See the link below for a simple explanation.
https://www.sciencealert.com/spinnin...ns-explain-why

Marv, Strikes again! I tell you man, thisis a GREAT idea!!!!!! I'll be looking to see what all I have that can be used for the same reason for odd-ball side nuts and even 6 point bolt heads that I have and making them from either stainless or just plain ole steel allen drive type bolts to fit those I have and not got a good mini nut driver to fit.....

LOVE IT so simple....... Almost too simple!

Quote:

Originally Posted by Hemi

LOVE IT so simple....... Almost too simple!

If you prefer, I can come up with something more complex. :-)

Marv,
NAHHHHH this one is GREAT!!!!! I'll be looking to see what all allen head bolts I have just for this very reason (I'm SURE, I've got plenty to work with!!!!)

I wonder how often I might need a micro nut driver?

But if I do ...

Ralph

A re-creation of Tesla's Egg of Columbus:

<video controls autoplay>
<source src="https://diqn32j8nouaz.cloudfront.net/tesla_egg_of_columbus.mp4" type="video/mp4">
Your browser does not support the video tag.
</video>

For those who have never encountered a Tippe-Top...

https://www.youtube.com/watch?v=FZob2aGv_yI