Quote Originally Posted by SteelCraft View Post
I bought a t-slot table for my milling machine. Table is from Polish Jarocin FWC25 milling machine. Dimension of the table are very simmilar to my drawings (20mm longer and 10mm wider)

Some photos before and after cleaning:

Click image for larger version.  Name: 395900600_2051595415196998_5128739900395679387_n (2).jpg  Views: 175  Size: 286.9 KB  ID: 46447Click image for larger version.  Name: st.png  Views: 163  Size: 726.1 KB  ID: 46448
Click image for larger version.  Name: 371529679_1072045670471477_3632451062305099339_n.jpg  Views: 168  Size: 482.8 KB  ID: 46450
Click image for larger version.  Name: 398028019_2008992349472610_2775695430247407850_n.jpg  Views: 169  Size: 470.9 KB  ID: 46449
Click image for larger version.  Name: 397084841_661975765916580_8575266079490222775_n.jpg  Views: 158  Size: 486.0 KB  ID: 46451

I also managed to finish Z axis guide. Cause of problem was last bolt on the bottom. Bolt was twisting end of the right dove tail. This is why it seemed to be wider. I drilled bigger hole and now everything is fine.
You saved so much work with buying that table. And good that you found the cause of your problems on the Z axis. Soon Milling!

Mark