Mini Mill Power Feed

[jjr2001]

Thanks PJ.

Actually I purchased extra motors and another power supply with controller. Even have the small enclosure for the "controller". My plan is to make one for the lathe and also one for my "universal grinder". The slowest speed I can run it on the mill would be a bit faster than I would want to run the lathe for a fine finish pass. Slow speed is about 1.5 inches per minute on the mill.
Just by watching the mill handle it looks a bit fast for the lathe. So I plan on making a gear reducer before I put it on the lathe.
I will swap the control box and power supply to either the lathe or grinder.