Miniature hand puller

[mklotz]

While repairing a clock, I needed a tiny puller to remove the hands so the clock face could be freed.

Not much to say here. The body of the tool was once a shaft collar. I milled one side down until it fit under the clock hands, then drilled and tapped it for a boosting screw with a conical end to center the tool in the tubular shaft to which the hands were attached.

[kbalch]

Thanks Marv! I've added your Miniature Hand Puller to our Miscellaneous category, as well as to your builder page: mklotz's Homemade Tools. Your receipt:

Miniature Hand Puller by mklotz

tags: puller, clock