![](https://pinterest.com/pin/create/button/?url=https%3A%2F%2Fwww.homemadetools.net%2Fforum%2Fshowthread.php%3Fp%3D36805%23post36805&media=https%3A%2F%2Fs3-us-west-1.amazonaws.com%2Fforumcache%2F36805-1.jpg&description=Monster Fly Cutter by mklotz - I needed a beefy fly cutter with a wide sweep so I cobbled this together and attached it to an R8 arbor that was fitted out to drive a less than satisfactory face mill supplied with my mill drill. The construction is fairly obvious but there is one nuance. One of the cutters is set 0.005" lower than the other and on a slightly smaller cutting radius. Thus it performs a finish pass right behind the main cutter which removes the bulk of the material.= "Pin It")
I needed a beefy fly cutter with a wide sweep so I cobbled this together and attached it to an R8 arbor that was fitted out to drive a less than satisfactory face mill supplied with my mill drill. The construction is fairly obvious but there is one nuance. One of the cutters is set 0.005" lower than the other and on a slightly smaller cutting radius. Thus it performs a finish pass right behind the main cutter which removes the bulk of the material.
Last edited by mklotz; Jul 6, 2017 at 11:17 AM.
---
Regards, Marv
Smart phones are to people what laser pointers are to cats
Homo sapiens is a goal, not a definition
12L14 (Jul 3, 2022), Canobi (Nov 26, 2017), Jon (Sep 3, 2015), kbalch (Sep 3, 2015), Paul Jones (Sep 3, 2015)
Thanks Marv! I've added your Fly Cutter to our Metalworking category, as well as to your builder page: mklotz's Homemade Tools. Your receipt:
Fly Cutter by mklotz
Marv, I like your design with the two stage cutting and also being able to use more conventionally ground lathe cutting tools, thanks, Paul Jones
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks