Thanks for the welcome. As far as building things in the garage door business, not too much. Just a couple of things like a spring spreader (able to spread the coils in order to get a block on) a stand for my portable band saw. I can use it as a cut off saw. I have a Miller DC 185 electric start welder mounted on a small trailer. I have added an awning to it to have some shade. But I am 6'-0" in height and didn't want the awning to have too much wind drag. So I have it mounted in a low profile. I am able to lift from the back at an angle so I don't bump my head. The build was making an arm with a 1/2" threaded rod inside 3/4" 14ga tubing that go inside 1" 14ga tubing and I use my cordless impact driver to spin the 3/4" nut to raise it up and down, much safer than just putting a stick under it to hold it up. That's it for now, I have to go to work, thanks Tom.