.I have a small band mill,so I need to build many of the tools required to lift and move logs.I dabble in blacksmithing,any piece of steel has potential for a tool.I hope to garner many ideas here that will help ease the stress on this beat up body,perhaps I can toss an idea or two out there for someone else. "Pin It")
Hi y'all,I'm a DIY guy who loves building what I can.I hate reading instructions,and usually build as I go,( I know that drives some folks nuts ).I have a small band mill,so I need to build many of the tools required to lift and move logs.I dabble in blacksmithing,any piece of steel has potential for a tool.I hope to garner many ideas here that will help ease the stress on this beat up body,perhaps I can toss an idea or two out there for someone else.
Hi Junker - welcome to HomemadeTools.net
Were you thinking along the lines of a small log crane?
New: BuildThreads.com - 300+ build posts/day (with photos)
Yes,there are many different designs,I'm hoping someone on here has built one.I tend to like manual rather than electric or gas powered,less is better for me.
If you're ready to start your build, you can make a new discussion in the Tools in Progress subforum (even if you're not yet already "in progress"). We have a very high response rate there, so you should be able to get many excellent answers to any questions about your build.
Click below to make your post:
https://www.homemadetools.net/forum/...newthread&f=15
New: BuildThreads.com - 300+ build posts/day (with photos)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks