Non-Standard ¼-20 Nuts

[rgsparber]

What do you do if you need a nut for a ¼-20 bolt but the standard ones are too large? Here is a simple technique that can be applied in other ways too.

If you are interested, please, click here


Your comments are welcome. All of us are smarter than any one of us.


Thanks,

Rick

[mklotz]

Since you're retapping the nut, maybe you want to think about using metric nuts, e.g. ...

7/16 in ( standard nut size for 1/4-20) = 0.438" AF
10 mm (standard nut size for 6 x 1) = 0.394" AF

[DIYer]

Thanks rgsparber! We've added your Non-Standard Nuts to our Fastening category,
as well as to your builder page: rgsparber's Homemade Tools. Your receipt:

Non-Standard Nuts by rgsparber

tags: fasteners