A Pneumatic Horizontal Bandsaw Feedrate Limiter
Once in a while, I must cut very thin stock on my horizontal bandsaw. This requires a low feedrate. Sure I can do this by slowly lowering the arm but it can get tedious. A solution is to have a saw attachment that can be quickly dropped in place to do the task. Here is one such tool.
A centerpiece of this article is turning eccentric spigots on round stock.
If you are interested, please see
https://rick.sparber.org/PneumaticFeedrateControl.pdf
Your comments are welcome. All of us are smarter than any one of us.
Thanks,
Rick