LinkBack URL
About LinkBacksHello. Sometimes I'm angry with the angle grinder, a lot of noise of dust and sparks. So I decided to build a Power Hacksaw. It works very quietly, and while it cutting you can do other things, hacksaw is automatically shut off.
Hello. Sometimes I'm angry with the angle grinder, a lot of noise of dust and sparks. So I decided to build a Power Hacksaw. It works very quietly, and while it cutting you can do other things, hacksaw is automatically shut off.
12L14 (Jul 31, 2019), Alan Purdy (May 7, 2019), blkadder (May 22, 2024), bruce.desertrat (May 6, 2019), Jon (May 4, 2019), LMMasterMariner (May 10, 2019), old_toolmaker (May 8, 2019), rossbotics (May 4, 2019), Scotsman Hosie (May 7, 2019), sossol (May 7, 2019), threesixesinarow (May 4, 2019), tonyfoale (May 22, 2024), Toolmaker51 (May 12, 2019), Tule (May 7, 2019)
Alan Purdy (May 7, 2019), blkadder (May 22, 2024), bruce.desertrat (May 6, 2019), LMMasterMariner (May 10, 2019), old_toolmaker (May 11, 2019), Paul Jones (May 8, 2019), rossbotics (May 4, 2019), Scotsman Hosie (May 7, 2019), sossol (May 7, 2019), Tule (May 7, 2019)
Alan Purdy (May 7, 2019), blkadder (May 22, 2024), LMMasterMariner (May 10, 2019), Miloslav (May 7, 2019), old_toolmaker (May 13, 2019), rossbotics (May 4, 2019), Scotsman Hosie (May 7, 2019), sossol (May 7, 2019), Tule (May 7, 2019)
Alan Purdy (May 7, 2019), drivermark (May 7, 2019), Moby Duck (May 7, 2019), rossbotics (May 4, 2019), Scotsman Hosie (May 7, 2019), sossol (May 7, 2019), Tule (May 7, 2019)
baja (May 7, 2019), blkadder (May 22, 2024), Moby Duck (May 7, 2019), old_toolmaker (May 13, 2019), Scotsman Hosie (May 7, 2019)
Beserkleyboy (May 6, 2019), blkadder (May 22, 2024), bruce.desertrat (May 6, 2019), CheezyRiderAZ (May 6, 2019), DIYer (May 4, 2019), fergiomaria (Nov 2, 2022), Jon (Jan 5, 2020), Moby Duck (May 7, 2019), olderdan (May 4, 2019), old_toolmaker (May 11, 2019), rossbotics (May 4, 2019), Scotsman Hosie (May 7, 2019), Seedtick (May 6, 2019), Slim-123 (May 6, 2019), Texf1 (May 7, 2019), zapornik (Apr 2, 2020)
Nice build Vyacheslav,
I made one some years ago and have used it a lot its on my builders page.
A suggestion if you dont mind is you could fit a No Volt Release switch, it is easy to forget that the machine is still live if you have if you have been doing something else while it is cutting. I retro fitted one to mine for that reason.
Regards
Olderdan
Vyacheslav.Nevolya (May 8, 2019)
Job well done Vyacheslav, very well executed, turned out nice and works great, thanks for sharing !
Doug
Comments are always welcome
Doug
Subscribe to my you tube channel
https://www.youtube.com/channel/UCDD..._as=subscriber
Tool Plans for Sale by rossbotics
old_toolmaker (May 13, 2019), Vyacheslav.Nevolya (May 8, 2019)
Bravo . It looks very sturdy! Thank you.
That sure does look like a solid machine. I would like to build one for my shop.
Dick
Links to some of my plans:
https://www.homemadetools.net/forum/...965#post105972 OFF-SET TAILSTOCK CENTER PLANS
http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS
http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS
http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET
http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks