Precision Pillar Drill

[editor@glue-it.com]

I've just measured all of the specifications:

Motor power: 120W @ 7000rpm
Ratios: 3.7:1 and 2.5:1
Spindle speeds: 1900rpm & 2800rpm
Spindle mount: 14x1mm
Spindle travel: 25mm
Throat: 64mm
Max chuck to table: 122mm (3mm drill bit max is ~85mm)
Dividing plate: 6, 8 and 10 holes
Divisions available: 1, 2, 3, 4, 5, 6, 8, 10
Table mount: 14x1mm
Column diameter: 28mm
Column length: 325mm