reversible pole receptacle

[BuffaloJohn]

So - you have missing information to answer your question:

1 - is the motor DC or AC?
1dc2 - if the motor is DC and is only 2 wires (not counting the case ground), then look up DPDT reversing switch and you will find many schematics
1dc4 - more complicated, but possible - find the datasheet on the motor (sometimes this information is printed on the motor)
1ac - see #2

2 - if the motor is AC, do you know the motor can be reversed by changing what is on the various wires?
2? - I don't know - you need to find a datasheet on the motor to find this out (sometimes this information is printed on the motor)
2n - some AC motors can't be reversed because there is no way to access the needed connections
2y - now you need to figure out which wires need to be energized in the CW and CCW rotations and design a switch that will do that

hope that helps...