Free 186 More Best Homemade Tools eBook:  
New: 300+ fresh build posts/day from 275 forums → BuildThreads.com

User Tag List

Results 1 to 10 of 27

Thread: SawStop GIF

Threaded View

  1. #7
    PJs
    PJs is offline
    Supporting Member PJs's Avatar
    Join Date
    Sep 2014
    Location
    Northern CA
    Posts
    1,917
    Thanks
    8,944
    Thanked 1,430 Times in 906 Posts

    PJs's Tools
    Oh Boy, Howdy! "It is impossible to make anything foolproof, because fools are so ingenious." anonymous, (theoretically Murphy's 3rd law). Lord knows I spent half of my engineering career developing products with that on the forefront...and only got close.

    Personally I prefer common sense and mechanically oriented safety systems. How about a foot switch with a quality braking system engaged when switch is turned off. The idea of a saw that self destructs based on "Relative" conductivity scares me more than the saw. First off I know my skin resistance is less than most people for some reason and second for the obvious stated above and then to disengage it because I'm cutting green wood...I'll be sure and stick with Old Saws, Thank You anyway!

    I know Absolutely if I use a push stick and stay a bit offset from the diametral axis and keep all my other body parts way the heck away from a metal blade spinning at ~3k rpm that my body parts should be fine...but no guarantees. Kick back or other distractions are just not allowed in my mind. Still the possibilities exist for a blade to explode or being hit by a comet... Maybe we could buy Insurance for that¿ Support for legalized gambling is a whole other babbling hole...rabbits are banned legislatively.

    To be legislated into having to buy (pay the additional legislative cost, tax and hardware/software) once again scares me more than the saw or going into space to wrestle a comet for that matter.
    ‘‘Always do right. This will gratify some people and astonish the rest.’’
    Mark Twain

  2. The Following 3 Users Say Thank You to PJs For This Useful Post:

    C-Bag (Feb 14, 2017), Paul Jones (Feb 14, 2017), Toolmaker51 (Feb 16, 2017)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •