Printable View
Sealant corner nozzle.
<video controls autoplay loop> <source src="https://diqn32j8nouaz.cloudfront.net/corner_weatherproof_sealing.mp4" type="video/mp4"> Your browser does not support the video tag. </video>
Previously:
https://www.homemadetools.net/forum/...897#post164078
https://www.homemadetools.net/forum/...097#post184327
https://www.homemadetools.net/forum/...934#post167916
https://www.homemadetools.net/forum/...892#post124559
https://www.homemadetools.net/forum/...141#post195538
Or use cake icing tips to add some texture
I wonder how it works on internal corners?
They never work as good as on tv!
A little Dawn detergent on your bare fingertip will make any calk seam smooth and even. Afterwards, if need be, a little WD40 on a paper towel will clean up any excess.Quote:
Originally Posted by odd one
Even with the different attachments it looks like it would still be difficult to go behind taps / faucets. At 6 seconds there is an obstruction, and it looks like something was deliberately missing so the nozzle would pass over it. Looks like a nice finish on uninterrupted runs with smooth surfaces and no internal corners, though. Unfortunately, I tend to see the difficult stuff like taps in the way, short runs with odd access where you have to start and stop, and uneven tiles with those horrible dips at the gaps...