Socket wrench for toilet oval water shutoff valve

[mklotz]

I hate those handles!

While musing on alternate designs for such a tool, it occurred to me that a beefier variant of this style of gripper...

https://www.amazon.com/Squadron-Prod...784647&sr=8-14

would accommodate many odd-shaped handle (OSH) designs.

Imagine a 1/8" steel plate with an array of holes drilled through it. The back side of this plate has a chunk of 3/8" hex steel welded in the middle.

In use bolts would be passed through the holes in a pattern that trapped the OSH. The bolts would be secured in place with nuts. Then a socket wrench would be used on the 3/8" hex steel to torque the OSH.