Although born in Devon I regard myself as Australian which is worse of course.
Do you mean the T&C grinder or the surface grinder?
Printable View
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks tonyfoale! We've added your MT3 to MT2 Sleeve Modification to our Machining category,
as well as to your builder page: tonyfoale's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-mt3-to-mt2-sleeve-modification-2"> <img src="/uploads/220134/homemade-mt3-to-mt2-sleeve-modification.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-mt3-to-mt2-sleeve-modification-2">MT3 to MT2 Sleeve Modification</a> <span> by <a href="http://www.homemadetools.net/builder/tonyfoale">tonyfoale</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/adaptor'>adaptor</a>, <a href='http://www.homemadetools.net/tag/collet'>collet</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Would it not have been easier to use an inexpensive female MT2 holder with a parallel shank and hold that in the spindexer? And there's nothing wrong about being an Aussie!