A Universal Centering Tool For a Drill Press

[rgsparber]

This centering tool finds the centerline of any round or rectangular stock clamped into a drill press vise in less than one second. My tool can handle stock from 1/8-inch to 1 1/2-inches wide but the idea can easily be extended to any width.

If you are interested, please see

https://rick.sparber.org/UniversalCenteringTool.pdf


Your comments are welcome. All of us are smarter than any one of us.


Thanks,

Rick

[DIYer]

Thanks rgsparber! We've added your Drill Press Centering Tool to our Drilling and Drill Presses category,
as well as to your builder page: rgsparber's Homemade Tools. Your receipt:

Drill Press Centering Tool by rgsparber

tags: drill press, centering

[Toolmaker51]

I'd have never thought to expand size/ range of this type of centering tool. Only I've seen are quite small, to drill shotgun ribs while placing sight beads. Some are just a punch, some have tap drill bushings, many beads are threaded 3-56 and 6-48.

[Mi Tasol]

Bloody obvious in hindsight

Why are so many things thus?

Congratulations for being one of the few with the foresight to create this