Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: Vice Buddy

  1. #1
    Supporting Member bobs409's Avatar
    Join Date
    Dec 2016
    Posts
    201
    Thanks
    449
    Thanked 591 Times in 111 Posts

    bobs409's Tools

    Vice Buddy

    I'm calling this a "Vice Buddy." This simply supports long heavy items in a bench vise. No more looking for things to prop under that work piece!

    What makes this interesting is the wedge shape designed post. A locking bolt pushes a moveable plate and wedges against the post so it cannot slip downward. Just a light touch is all that's needed, no cranking down of the bolt. I didn't invent this design, I saw this on another tool and incorporated it into this.

    This can attach to your workbench with screws or with a C clamp. To make the tapered post, I took a piece of square tube and cut a taper down it lengthwise. Then I capped it with a piece of metal and welded it.

    Vice Buddy-1.jpgVice Buddy-2.jpgVice Buddy-3.jpgVice Buddy-4.jpgVice Buddy-5.jpgVice Buddy-6.jpgVice Buddy-7.jpg

    186 More Best Homemade Tools eBook

  2. The Following 17 Users Say Thank You to bobs409 For This Useful Post:

    Andyt (Jan 22, 2020), baja (Jan 22, 2020), Crusty (Jan 21, 2020), DIYer (Jan 21, 2020), Drew1966 (Jan 21, 2020), Inner (Jan 21, 2020), Jon (Jan 21, 2020), Karl_H (Jan 25, 2020), Little Rabbit (Jan 21, 2020), Rangi (Jan 25, 2020), rdarrylb (Jan 21, 2020), Savage11 (Jan 21, 2020), Scotsman Hosie (Jan 26, 2020), strube1369 (Jan 23, 2020), thehomeengineer (Jan 21, 2020), verticalmurph (Jan 21, 2020), yester145 (Jan 26, 2020)

  3. #2
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,056
    Thanks
    772
    Thanked 1,850 Times in 1,652 Posts


    Thanks bobs409! We've added your Workbench Vise Rest to our Workholding category,
    as well as to your builder page: bobs409's Homemade Tools. Your receipt:




    2000 Tool Plans

  4. The Following User Says Thank You to DIYer For This Useful Post:

    bobs409 (Jan 21, 2020)

  5. #3
    Supporting Member Drew1966's Avatar
    Join Date
    Oct 2016
    Posts
    457
    Thanks
    517
    Thanked 144 Times in 89 Posts
    Nice. Simple. Elegant

  6. The Following User Says Thank You to Drew1966 For This Useful Post:

    bobs409 (Jan 21, 2020)

  7. #4
    mlochala's Avatar
    Join Date
    Nov 2012
    Posts
    503
    Thanks
    70
    Thanked 145 Times in 103 Posts

    mlochala's Tools
    Excellent idea. Thanks for sharing!

  8. The Following User Says Thank You to mlochala For This Useful Post:

    bobs409 (Jan 22, 2020)

  9. #5

    Join Date
    Oct 2019
    Posts
    1
    Thanks
    0
    Thanked 1 Time in 1 Post
    Great simiple shop tool. Will be building one

  10. The Following User Says Thank You to lynn48 For This Useful Post:

    bobs409 (Jan 22, 2020)

  11. #6
    Jon
    Jon is offline Jon has agreed the Seller's Terms of Service
    Administrator
    Supporting Member
    Jon's Avatar
    Join Date
    Jan 2012
    Location
    Colorado, USA
    Posts
    25,446
    Thanks
    7,925
    Thanked 38,618 Times in 11,284 Posts
    Congratulations bobs409 - your Workbench Vise Rest is the Homemade Tool of the Week!

    This is a clever and extremely useful tool that I'm sure many other guys around here will be building.

    Some more good builds from this week:

    Mobile Gantry Crane by barts metalwork
    Electro Hydraulic Jack by Mr.DK DIY
    Pulley Key Remover by thehomeengineer
    Belt Grinder Flat Platen by celsoari
    Magnetic Stirrer by Salix84
    Container Slide Pads by Frank S
    Coal Forge by Savage11
    Mini Press Brake by jonlegrand1
    Lathe Drive by tonyfoale
    Gas Cylinder Caddy by bobs409
    Universal Vise by Tek12h
    Tubing Profiler by Kovanca Polock
    Lathe Grinder Mount by bouboulas
    Seal Puller by nicky1
    Circular Saw Guide by Didpoolhall
    Gasket Cutter by jdurand
    Voltage Tester by brnjh1
    Air Compressor by Vyacheslav.Nevolya
    Compass by RCTURKA

    bobs409 - you'll be receiving a $25 online gift card, in your choice of Amazon, PayPal, or bitcoin. Please PM me your current email address and gift card choice and I'll get it sent over right away.

    More importantly, this is your 5th Homemade Tool of the Week win! I've just added the silver wrench-on-pedestal graphic to the awards showcase in your postbit, visible underneath your avatar.




    Great job, and you're in excellent company joining these other 5-time winners: rgsparber, rossbotics, Christophe Mineau, Brendon, Frank S, mklotz, Vyacheslav.Nevolya, brianhw, LMMasterMariner, Tuomas, olderdan, tonyfoale, thehomeengineer, and Stevohdee.

    Here are all of your Homemade Tool of the Week winning tools. Congrats again



  12. #7
    Supporting Member bobs409's Avatar
    Join Date
    Dec 2016
    Posts
    201
    Thanks
    449
    Thanked 591 Times in 111 Posts

    bobs409's Tools
    WOW! Thank you Jon! It's really nice to have such a great place to show some of my creations.

  13. #8
    Supporting Member
    Join Date
    Jul 2019
    Posts
    122
    Thanks
    10
    Thanked 67 Times in 41 Posts
    Good idea. I use two vices, one at either end of the bench which means you can support or work on either end of the job but if you don’t have a second vice then with respect I think this is the next best thing. If you are thinking of using two vices they don’t need to be the same size just ensure that the rear or fixed jaw on both vices are exactly in line with each other. A simple string line will do it nicely. Cheers Stuart.

  14. The Following User Says Thank You to Scrounga For This Useful Post:

    bobs409 (Jan 25, 2020)

  15. #9
    Supporting Member Skun Knuckles's Avatar
    Join Date
    Dec 2017
    Location
    Gippsland Victoria Australia
    Posts
    81
    Thanks
    126
    Thanked 51 Times in 31 Posts

    Skun Knuckles's Tools
    The taper design is a brilliant idea,that I will be adapting to the floor stand that I use for supporting long material in the drill press.

  16. The Following User Says Thank You to Skun Knuckles For This Useful Post:

    bobs409 (Jan 26, 2020)

  17. #10
    Supporting Member
    Join Date
    Dec 2018
    Posts
    18
    Thanks
    28
    Thanked 9 Times in 8 Posts

    thinkbackwards's Tools
    Thanks that's brilliant. Thnk I'll add a toggle clamp on the side to fasten it to the work bench quickly and easy horizontal adjustment.

  18. The Following User Says Thank You to thinkbackwards For This Useful Post:

    bobs409 (Jan 31, 2020)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •