Aux Jaws for 4" Kurt Style Milling Vise with prints

[jjr2001]

The dimensions of these jaws are for an Import Kurt Style 4" Milling Vise.
The original jaw can only fit in one position since the mounting holes are not centered.
I wanted to be able to use both the top and bottom of the jaws for different purposes.
The jaw mounting screws are 6 mm on my vise so I slotted the mounting holes to fit.

Several versions are shown.
Original
Soft for future milling as necessary.
Soft with built in "parallel" function.
Steel with 1/4" pins for odd and circular shapes.

Each of the jaws can be used on either the top or the bottom as needed.

Cheers, JR