Thanks for your comments, thevillageinn!

My saw is held to the bench by the tabs I welded to the bottom of the legs. The tabs can be clamped for temporary use in a location, or the table can be screwed or through-bolted to a bench using the holes I drilled in the tabs for a more permanent installation.

Now retired, I've adopted a new hobby (Building my YouTube channel). I get a lot of enjoyment, learning about how to make videos. I also enjoy sharing the projects I take on and usually provide free drawings (when applicable) to most of my video projects. It's fun to share with others and hear feedback about their experiences - much like this forum. So many folks here have graciously shared their knowledge and experience. I love it!